#1 2019-05-12 19:47:10

simplevps
Member
Registered: 2019-05-12
Posts: 1

Dante socks5 auth issue

Hi,

I have a inception vps and I have installed Dante and set it up and it runs successfully. (Debian 8 minimal)

The issue I'm having is that when I connect to it I receive this error.

from the logs

May 12 19:23:16 (1557688996.999740) sockd[2789]: info: block(1): tcp/connect ]:  151.xx.xxx.xxx.60358 10.10.10.10.1002 -> 10.10.10.10.60358 googleads.g.doubleclick.net.443: pam_authenticate(): User not known to the underlying authentication module
May 12 19:23:19 (1557688999.358131) sockd[2787]: info: block(1): tcp/connect ]:  151.xx.xxx.xxx.60359 10.10.10.10.1002 -> 10.10.10.10.60359 googleads.g.doubleclick.net.443: pam_authenticate(): User not known to the underlying authentication module
May 12 19:23:19 (1557688999.368148) sockd[2788]: info: block(1): tcp/connect ]:  151.xx.xxx.xxx.60360 10.10.10.10.1002 -> 10.10.10.10.60360 googleads.g.doubleclick.net.443: pam_authenticate(): User not known to the underlying authentication module
May 12 19:23:19 (1557688999.428755) sockd[2789]: info: block(1): tcp/connect ]:  151.xx.xxx.xxx.60361 10.10.10.10.1002 -> 10.10.10.10.60361 init-p01st.push.apple.com.80: pam_authenticate(): User not known to the underlying authentication module
May 12 19:23:19 (1557688999.477848) sockd[2790]: info: block(1): tcp/connect ]:  151.xx.xxx.xxx.60362 10.10.10.10.1002 -> 10.10.10.10.60362 googleads.g.doubleclick.net.443: pam_authenticate(): User not known to the underlying authentication module
May 12 19:23:22 (1557689002.107720) sockd[2787]: info: block(1): tcp/connect ]:  151.xx.xxx.xxx.60363 10.10.10.10.1002 -> 10.10.10.10.60363 init-p01st.push.apple.com.80: pam_authenticate(): User not known to the underlying authentication module
May 12 19:23:23 (1557689003.701772) sockd[2788]: info: block(1): tcp/connect ]:  151.xx.xxx.xxx.60364 10.10.10.10.1002 -> 10.10.10.10.60364 dante.80: pam_authenticate(): User not known to the underlying authentication module
May 12 19:23:23 (1557689003.706255) sockd[2789]: info: block(1): tcp/connect ]:  151.xx.xxx.xxx.60365 10.10.10.10.1002 -> 10.10.10.10.60365 www.google.com.443: pam_authenticate(): User not known to the underlying

Here is my Dante config file

logoutput: /var/log/danted/danted.log

internal: venet0:0 port = 1002
external: 151.xx.xxx.xxx

method: username none #rfc931
clientmethod: none
user.privileged: root
user.notprivileged: nobody
user.libwrap: nobody

client pass {
        from: 0.0.0.0/0 port 1-65535 to: 0.0.0.0/0
        log: connect disconnect error
}
pass {
        from: 0.0.0.0/0 to: 0.0.0.0/0
        protocol: tcp udp
}

I have created a user & pass 'socks' in Debian and created a user and pass during the setup of Dante.

I have tried connecting with a username and password and without. I keep getting the same error. Any help appreciated!

Offline

Board footer

Powered by FluxBB