#1 2018-05-28 02:11:31

Trusted Member
Registered: 2016-01-30
Posts: 78

IPv6 routing stopped working at Netherlands, don't know when and why.

Scenario that used to work before
use /65 instead of /64 for eth0: assign ADDR::2/65
create device tun0, assign ADDR:8000::1/65

ip neigh add proxy ADDR:8000::1 dev eth0
sysctl -w net.ipv6.conf.all.forwarding=1
sysctl -w net.ipv6.conf.all.proxy_ndp=1

from this point on address ADDR:8000::1 is reachable from outside.
right now it is no longer working, ADDR:8000::1 is not reachable.
I haven't touched initial working configuration for over two years, it was functioning at least a year ago.

Last edited by zwv970 (2018-05-28 13:57:23)


Board footer

Powered by FluxBB